Drives are painted
08-22-2006, 04:55 PM
#11
Registered
Join Date: Oct 2004
Location: medellin colombia, pablo escobar's lil town
Posts: 8,390
Likes: 0
Received 6 Likes
on
4 Posts
Re: Drives are painted
great job roger those stands are the chit for doing it right! for some reason enamel seems to hold up really well in salt water even though i would never use it on a car.
Re: Drives are painted
Charter Member
08-23-2006, 08:35 AM
#18
Registered
Thread Starter
Join Date: Dec 2002
Location: Kankakee Illinois
Posts: 3,705
Likes: 0
Received 0 Likes
on
0 Posts
Re: Drives are painted
Thanks for the kind words guys.
Payton; I know what you mean about the green tape, It's kind of a nice
touch. Hated to get paint on it.....
Just for the record, the stand that the upper sits on is bolted to the metal frame of the lower stand by a 9/16 bolt through the center. In the picture it looks like it might just be sitting on top of the plywood top, when in fact, it is very sturdy.
Roger
Payton; I know what you mean about the green tape, It's kind of a nice
touch. Hated to get paint on it.....
Just for the record, the stand that the upper sits on is bolted to the metal frame of the lower stand by a 9/16 bolt through the center. In the picture it looks like it might just be sitting on top of the plywood top, when in fact, it is very sturdy.
Roger
08-24-2006, 01:35 AM
#20
10x
VIP Member
Re: Drives are painted
Looks great Rog, like we would all expect of you. It's been a while since that hull seen a pair of drives.
It's been a while since that hull seen a pair of drives.
__________________
Fountain powerboats rule "The Preacher"
Chicago Powerboat Club Director
[email protected]
www.chicagopowerboat.com
Fountain powerboats rule "The Preacher"
Chicago Powerboat Club Director
[email protected]
www.chicagopowerboat.com
