Re: Oil Filters....good ones, bad ones
Originally Posted by MrCIG
I use AC Delco PF35. No problems,
Mark for a 525 Hp 502 ci .... for my little puppy :D :D after read this thread ...i never look for Merc again :eek: ... |
Re: Oil Filters....good ones, bad ones
Originally Posted by RLW
The Wix Racing counterpart for the Fram HP1 is a 51515R.
http://www.wixfilters.com/filterlook...sp?Part=51515R Nordic95 |
Re: Oil Filters....good ones, bad ones
They are making the A/C Delco PF1218 a shorter filter now,so if you want the old PF 1218 you had better stock up on them now because the short ones are already replacing the old ones.
Later Tammy P.S Strip Poker 388 I will have to see what I can get them for with my discount.I can get them at cost. |
Re: Oil Filters....good ones, bad ones
Originally Posted by RLW
The Wix Racing counterpart for the Fram HP1 is a 51515R.
http://www.wixfilters.com/filterlook...sp?Part=51515R |
Re: Oil Filters....good ones, bad ones
Ford and Chrysler.
Check out the site below and scroll half way down. http://www.wixfilters.com/filterlookup/racing.asp |
Re: Oil Filters....good ones, bad ones
Originally Posted by RLW
Ford and Chrysler.
Check out the site below and scroll half way down. http://www.wixfilters.com/filterlookup/racing.asp Heres mine 51222R.looks like the highest flow and bigest |
Re: Oil Filters....good ones, bad ones
2 Attachment(s)
I use the big k& N-it does have a bypass valve,my motor does not have one BUT because of its shear size and internal surface area I don't expect the bypass to ever open,Smitty
|
All times are GMT -5. The time now is 06:29 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.