1st six seat MTI
#21
A to Z
Platinum Member
Re: 1st six seat MTI
the running surface is 39'11" (supercat spec) with the 4' bustle... it is basically the bustle for the rudder version but cut out to accept sixes...
the 42's and 44's are the same bottom, just different tails usually...
the 42's and 44's are the same bottom, just different tails usually...
#22
Registered
Re: 1st six seat MTI
so is that 42 MTI riding shot gun, guess he has a new one on order. Those E dockers change boats as often as some guys change underwear
Beautiful boat, best of luck to Welladjusted
Beautiful boat, best of luck to Welladjusted
#24
Re: 1st six seat MTI
Thanks Jeff! It was nice to finally get to meet you and you could expect to have her behind you in the next year. I am a proud papa and Randy, Gary, Sean, Chris, Roger, and the crew at MTI did one heck of a job on this one. It ran flawlessly and we even got to see some decent numbers. This boat practically drive itself. And yes it will look completely different after the winter thanks to Visual Imagination. By the way, Grandpa loved the engine compartment (can't you tell). You can take the old man out of racing but you can't take racing out of the old man. Finally, yes, that is 42MTI and his boat is getting all dolled up right now and will be out before too long.
Scott
Scott
#25
VIP Member
VIP Member
Re: 1st six seat MTI
Originally Posted by Sean H
the running surface is 39'11" (supercat spec) with the 4' bustle... it is basically the bustle for the rudder version but cut out to accept sixes...
the 42's and 44's are the same bottom, just different tails usually...
the 42's and 44's are the same bottom, just different tails usually...
__________________
Happily retired and living in Heavens waiting room.
Happily retired and living in Heavens waiting room.
#30
A to Z
Platinum Member
Re: 1st six seat MTI
Originally Posted by Ms PatriYacht
so is that 42 MTI riding shot gun,