Intake Manafold
What would be the best intake manafold for a 420HP? I had a Dart Intake manafold but it was for an engine that had a higher RPM range then the 420HP. The max RPM I have is 5000. Thanks
|
Re: Intake Manafold
for the absolute best contact wilson manifolds, tell him what your looking to do hell tune a manifold to your needs.
|
Re: Intake Manafold
I would recomend a Edelbrock Performer RPM.
|
Re: Intake Manafold
Originally Posted by mrhorsepower1
I would recomend a Edelbrock Performer RPM.
|
Re: Intake Manafold
If it's fresh water you will be alright. Salt water of course will take it's toll without fresh water flushing. That intake being a raised runner dual plane will give you the best torque curve for you combination. A upgrade camshaft grind will also help.
|
Re: Intake Manafold
The Merlins on my 420's work great.
http://www.zippyvideos.com/683233795...6/7-25-05_008/ |
Re: Intake Manafold
Originally Posted by gripit
How would an Edelbrock Performer RPM hold up in marine conditions? I was told Dart makes some with Merlin Brass coated water jackets.
|
Re: Intake Manafold
Dart does not but Merlin/World products makes it with the brass inserts
|
Re: Intake Manafold
Originally Posted by mrhorsepower1
I would recomend a Edelbrock Performer RPM.
|
Re: Intake Manafold
i have a gm intake off of a 420 with brass insert , ported 100.00 bucks shipped to you . pm me if interseted.
|
All times are GMT -5. The time now is 06:18 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.