Just a quick two thumbs up !!
Had multiple conversations today with one of the most helpful gentlemen i've dealt with in the marine industry. His name is Mark and he owns and operates MER Performance Marine Services down in South Carolina. Took as much time as my dumbassss needed to explain things to me and give me both best and worst case scenarios. Mark just a quick thanks for your patience. If ya dont want to take my word for it feel free to contact him yourself
Marc 843-399-8785 |
Re: Just a quick two thumbs up !!
A good reason for having caller ID,just wait until he meets you. :drink: :drink:
|
Re: Just a quick two thumbs up !!
Originally Posted by berns29scarab
Had multiple conversations today with one of the most helpful gentlemen i've dealt with in the marine industry. His name is Mark and he owns and operates MER Performance Marine Services down in South Carolina. Took as much time as my dumbassss needed to explain things to me and give me both best and worst case scenarios. Mark just a quick thanks for your patience. If ya dont want to take my word for it feel free to contact him yourself
Marc 843-399-8785 |
Re: Just a quick two thumbs up !!
Mark is super to deal with.
|
Re: Just a quick two thumbs up !!
Originally Posted by Strip Poker 388
What did he say about the hours?
Leak down %'s are as follows Port engine cyl- 1=13% 3=9% 5=4% 7=5% 2=12% 4=10% 6=12% 8=9% Stbd engine cyl- 1=9% 3=4% 5=12% 7=30% 2=8% 4=4% 6=29% 8=10% |
Re: Just a quick two thumbs up !!
Originally Posted by berns29scarab
he did a mechanical survey on it about 20 hrs ago...
Leak down %'s are as follows Port engine cyl- 1=13% 3=9% 5=4% 7=5% 2=12% 4=10% 6=12% 8=9% Stbd engine cyl- 1=9% 3=4% 5=12% 7=30% 2=8% 4=4% 6=29% 8=10% Stbd motor 30% if thats based off 100psi is pretty high,.did he think it was rings or valves? |
Re: Just a quick two thumbs up !!
somethings happening on #6 and #7 on stbd engines, the engines were NOT hot when this was done...engines were run for approx 5 mins then this test was performed...unsure if its a valve issue or what
|
Re: Just a quick two thumbs up !!
they potential buyer ran away once he saw the results so MArc never went any further to determine if it was leaking thru exhaust, intake, manifold etc...nor did he do a compression test.
|
Re: Just a quick two thumbs up !!
Originally Posted by berns29scarab
somethings happening on #6 and #7 on stbd engines, the engines were NOT hot when this was done...engines were run for approx 5 mins then this test was performed...unsure if its a valve issue or what
Have they reajusted the price figuring you will have to freshen the motors,I would do both!!! |
Re: Just a quick two thumbs up !!
thats a matter of opinion i guess...lol
|
All times are GMT -5. The time now is 09:21 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.