Any of you ever messed around with the bam speed calculator???
#1
Registered
Thread Starter
Any of you ever messed around with the bam speed calculator???
It's pretty cool and was wondering if anybody had real world numbers compared to the computer numbers???? It seems pretty accurate...
http://go-fast.com/boat_speed_predictions.htm
http://go-fast.com/boat_speed_predictions.htm
#2
Registered
Join Date: Feb 2010
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
I tried the calculator, According to their numbers my 330 HP Pachanga22 should be running 76 mph, I'm only seeing 60 to 62 on a good day so I must need a bigger engine, at least thats what Im telling myself to justify it !! LOL
#4
Platinum Member
Platinum Member
Join Date: Apr 2001
Location: Beautiful Fort Lauderdale www.cheetahcat.com
Posts: 10,833
Likes: 0
Received 6 Likes
on
6 Posts
You can play with it, the small flats boats I used to build it was right on,the Open fishing center console cats it was close (a lot of drag) Top side,on the race stuff,fudge the constant up and it worked.
#5
Registered
Join Date: Apr 2009
Location: Denmark and hopefully some place nice
Posts: 1,852
Likes: 0
Received 1 Like
on
1 Post
It's cool for some stuff, but you have to remember that the constant has to be right. 225, 250, 275, 300 are not enough, you'll need to figure out exactly what number you need. The new OL SV43 needs a constant of 300+ in some cases. mecapndave probabley need a constant of 205-210 for the Pachanga and make sure the weight is correct. It works very well for figuring out, which kind speed increase you can expect for an hp upgrade.
#7
Registered
AO is right. You are "calibrating" the model with your own specific hull constant based on known HP and speed. Then you can input new HP and get a prediction for your hull. You could also gain speed without increasing HP by bottom blueprinting, drive blueprinting, drive height changes, CG changes etc. all of which are lumped together in the hull constant.
#9
Platinum Member
Platinum Member
Join Date: Apr 2001
Location: Beautiful Fort Lauderdale www.cheetahcat.com
Posts: 10,833
Likes: 0
Received 6 Likes
on
6 Posts
TC, is right it is adjustable and can be tweaked, I used to build a couple lines of composite Flats boats ,the old computer analysis said 48 MPH with a 90 ,the second line I did was a foot longer and ran 54 MPH This time with a 70 ,I put those numbers in the RAM program and got the same exact speed ,a decent NON POD Cat will be well above 300 on the efficiency.