Stellings Box--Steering Questions
#1
Registered
Thread Starter
Join Date: Oct 2001
Location: Madison, WI
Posts: 1,153
Likes: 0
Received 0 Likes
on
0 Posts
Stellings Box--Steering Questions
Hello Everyone...I'm hoping someone can give me some information.
Does anyone have a Stellings box with a single bravo setup? If so, could you find a part number or a manufacturer of the hydraulic steering rams?
I'm working on a top-secret project with a friend and would love to have that info. If no part numbers...how about some specs for the steering rams for a Stellings box?
Thanks in advance
Dave
Does anyone have a Stellings box with a single bravo setup? If so, could you find a part number or a manufacturer of the hydraulic steering rams?
I'm working on a top-secret project with a friend and would love to have that info. If no part numbers...how about some specs for the steering rams for a Stellings box?
Thanks in advance
Dave
#3
Charter Member # 55
Charter Member
Re: Stellings Box--Steering Questions
You use the same hydraulic rams. Differernt manufacturer's have different mounting systems for the rams.
Marine machine uses an extended mount on the transom. Imco has various setups that mount ears on the box and/or the drive.
This AT has Marine Machine steering with Stellings boxes. Its twins, but the set up is the same as what would be used on a single.
http://www.offshoreonly.com/esvon/page-10933.html
Marine machine uses an extended mount on the transom. Imco has various setups that mount ears on the box and/or the drive.
This AT has Marine Machine steering with Stellings boxes. Its twins, but the set up is the same as what would be used on a single.
http://www.offshoreonly.com/esvon/page-10933.html