Re: Anyone using FloScan to measure fuel consumption?
 

My twin 525's use the Floscan Twinscan GPH model 231 sensor.....

Re: Anyone using FloScan to measure fuel consumption?
 

I use the twin scan on mine. Twin 502 415hp. Intrfaced with gps. can watch real time mpg. totalizer is always very accurate. excellent for long trips. highly recomended. Be warned: you may better off not knowing.

Re: Anyone using FloScan to measure fuel consumption?
 

thanks! That is what I wanted to know! Not the gas mileage of course, the model!

Re: Anyone using FloScan to measure fuel consumption?
 

If I had one it would be:

I swear AT mine...

I use a Credit Card to measure fuel flow...

Re: Anyone using FloScan to measure fuel consumption?
 

Hey Jeff32,

As far as which one take the HP of each moter divide by 10% add 5 and this should give you a ballpark figure of you gph at wot...This is based on FloScan measurements....

Re: Anyone using FloScan to measure fuel consumption?
 

485 hp so my guess is 53 right?

Re: Anyone using FloScan to measure fuel consumption?
 

times 2 ? Would be 106 gal per hour? does not make sense right?

Re: Anyone using FloScan to measure fuel consumption?
 

One on eBay right now.

Re: Anyone using FloScan to measure fuel consumption?
 

Livorsi Marine has its own version of them with an anolog display to match the Livorsi line. They utilize the FloScan sensor. It is very important to match the correct HP to the gauge. visit www.livorsi.com

Re: Anyone using FloScan to measure fuel consumption?
 

it only goes up to 32 gph