Imco Minus 2 Trade
 

I purchased -2 lowers for XR drives. They were a little too agrressive on height. Instead of adding spacers, does anyone have -1 cases or complete lowers they would be willing to trade. Mine are as new with about 10hrs of use. They were purchased as cases and now have my XR prop shaft installed. I can disassemble for case trade or complete trade. Just don't like the idea of spacers.

Re: Imco Minus 2 Trade
 

i have a new set of standard low water pick up lowers call me we will work out somthing paul 954 260 6982 legacy marine

Re: Imco Minus 2 Trade
 

Thanks for the reply, I still have my stardard XR lower cases with dual water pick-ups if that's what you were refering to. Instead of taking advice on purchasing -1s, I went with -2s and was a little too high. I thought why not try, I could always lower them. Now I find myself not wanting to use spacers because of appearance.

Re: Imco Minus 2 Trade
 

What is the boat you are/were running them on ? Might be interested in purchase if reasonable.

Re: Imco Minus 2 Trade
 

Oh No!!! The modifications begin :eek: :evilb:

Re: Imco Minus 2 Trade
 

Quiet now! Samantha might hear.

Re: Imco Minus 2 Trade
 

I'm running them on a 2001-42' Fountain. I've only tried them with the stock Bravo props that were on the boat (serial numbers match original invoice of boat). I don't think I want to start throwing money at different props and such. The boat ran good with stock lowers with the 575s, just thought I'd try to gain little. I boat with someone that had good luck with only going 1" higher than stock on a similar age Fountain. Thought I'd try 2" and slips too much with stock props, I think?

Re: Imco Minus 2 Trade
 

Perhaps if I told Samantha they might just show up under your Christmas tree come Christmas morning :D

Re: Imco Minus 2 Trade
 

That's possible, Indianapolis and Evansville, IN are not that far apart.

Re: Imco Minus 2 Trade
 

Raggededge, what year and boat do you have?