Offshoreonly.com
Page 6 of 7
« First
4
5
6
7
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   New Whipple 305's (https://www.offshoreonly.com/forums/general-boating-discussion/149466-new-whipple-305s.html)

HotPursuit 01-29-2007 07:10 PM
Re: New Whipple 305's
 
Originally Posted by Strip Poker 388 (Post 2008894)
Taste test:drink: and the spy cam:evilb:
LMAO in that case you may need a day for rebuild.:drink:

skater40 01-29-2007 07:26 PM
Re: New Whipple 305's
 
Originally Posted by Whipple Charged (Post 2009056)
Yes, with 19psi. Our MOAC is very efficient and the compressor is really working well at that PSI.

With 93 octane, 13-14psi is about max depending on maximum amount of timing and a/f.

Thanks,
Dustin
KABOOM.:eek:

customryder 01-29-2007 08:04 PM
Re: New Whipple 305's
 
Originally Posted by Whipple Charged (Post 2008808)
Here's our massive flame arrestor

http://img253.imageshack.us/img253/1...odyweb1da0.jpg

air-bypass system for better idle control and lower parasitic losses
http://img174.imageshack.us/img174/9...passwebvo5.jpg

Belt system, bolts to 6-bolt v-belt crank pulleys, uses standard cross overs, 16-rib serpentine, spring loaded tensioners, guarded sc pulley and idlers
http://img253.imageshack.us/img253/9...beltwebeh1.jpg
Do you have a pic of one with the sea pump, alt,
& power steering pump. installed?

GT 01-30-2007 08:25 AM
Re: New Whipple 305's
 
That set up is a work of art. I guarantee, this will be the wave of the future. That efi set up is so compact, in relation to it's potential. I hope it still fit's under my scoop:rolleyes: Very nice job Dustin.

blaniac 01-30-2007 10:37 AM
Re: New Whipple 305's
 
Originally Posted by GT (Post 2009758)
That set up is a work of art. I guarantee, this will be the wave of the future. That efi set up is so compact, in relation to it's potential. I hope it still fit's under my scoop:rolleyes: Very nice job Dustin.
You ain't kiddin Gary, look forward to seeing your next motor with this new technology :drink:

Whipple Charged 01-30-2007 01:05 PM
Re: New Whipple 305's
 
Originally Posted by HotPursuit (Post 2009226)
If they were made from copper I would be rich!! :D
Only driving on weekends back & forth from chruch or was that the Prop Stop. Ok I'll bite how much do they weight compared to my LittleFields?
P.S. Mark says he can't mount pictures on the Motor. :drink:
The blower itself is about 75lbs. Not sure how much that 1471 weighs. Man, your not kidding, our intercoolers use so much copper that they now cost more than the superchargers!
Dustin

PS Marks pretty savvy with the computer, I think he can print out a very large picture and secure the picture to the motor. I'm thinking big power!:D

HotPursuit 01-30-2007 10:36 PM
Re: New Whipple 305's
 
What controls the air bypass valve and do you run a inline check valve?Hope not too many dumb coonass questions!!!
I guess this cancels a idle solinoid.

Thanks Keith

Cat man do 01-31-2007 09:56 AM
Re: New Whipple 305's
 
THE DUST SETTLES AND WHIPPLE STILL STANDS AS THE CHAMPION AND THE CHOICE OF CHAMPIONS. KUDOS TO DUSTIN AND HIS COMPANY. QUALITY PERIOD:drink:

Cam-shaft 01-31-2007 11:44 AM
Re: New Whipple 305's
 
Your product looks top notch. I am thinking #VI dry sumps for sure. Thanks, Cam-shaft.

HotPursuit 02-02-2007 07:57 PM
Re: New Whipple 305's
 
Dustin will you at the Miami Boat Show? Hope this is not a repeated question!!! :drink:


All times are GMT -5. The time now is 09:04 PM.
Page 6 of 7
« First
4
5
6
7
Show 40 post(s) from this thread on one page


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.