New Whipple 305's
#23
Registered
Thread Starter
Join Date: Oct 2000
Location: Fresno, CA, 93722, USA
Posts: 1,436
Likes: 0
Received 4 Likes
on
4 Posts
Re: New Whipple 305's
Dustin
#26
Registered
Join Date: Dec 2000
Location: EASTON MA.
Posts: 6,281
Likes: 0
Received 0 Likes
on
0 Posts
Re: New Whipple 305's
WHAT WILL IT GET YOU FOR HP ON A 509 USING GAS 93. and what size is it to a reg blower 10/71 12/71?? will it pull over 1000hp with this set up oh carbs can you run a single dom, thanks looking to go blown nexted yr.
#28
Registered
Join Date: Oct 2004
Location: Thousand Oaks, CA
Posts: 483
Likes: 0
Received 0 Likes
on
0 Posts
Re: New Whipple 305's
Mi Casa is su casa. I will look for the boat at the show. You coming down? I think we have dinner ligned up one of the nights with B. Teague.
#30
Registered
Thread Starter
Join Date: Oct 2000
Location: Fresno, CA, 93722, USA
Posts: 1,436
Likes: 0
Received 4 Likes
on
4 Posts
Re: New Whipple 305's
Just to let some know, we've dubbed this compressor the 305 as that's the cubic inch of air it pumps per rev. But, when comparing to our other sized compressors, it's acutally double the size of the 200ci sc (3.3L). This compressor is driven off the smaller gear, which is 33% slower, so if it was driven off the big gear, it's a 6.6 liter or 406 cubic inch. The difference is the max speed. Max speed is 20,000 rpm driven off the small gear, 33% less if it was off the big gear. I'm just posting this because people have said it's smaller than the quad w200's when in reality, it's the same size, but more efficient.
More pics with the TB:
More pics with the TB: