New Whipple 305's
#41
Registered
Thread Starter
Join Date: Oct 2000
Location: Fresno, CA, 93722, USA
Posts: 1,436
Likes: 0
Received 4 Likes
on
4 Posts
Re: New Whipple 305's
Intake temps were 20-30 deg above ambient below our MOAC intercooler. EGT's high to low were approx. 40deg F apart. Idle'd at 800rpm.
Thanks,
Dustin
#43
Registered
VIP Member
Re: New Whipple 305's
Looks great Dustin? Talking about looking great hows Shonda
doing these days? I'll buy two if she will take care of all the programming!!
doing these days? I'll buy two if she will take care of all the programming!!
#45
Registered
VIP Member
Re: New Whipple 305's
Looking to trade up the 1471s, how much trade in value.
#48
Re: New Whipple 305's
How much boost do you think I can run with the moac, aluminum heads 8:1 comp. and 93 pump gas.
#49
Registered
Thread Starter
Join Date: Oct 2000
Location: Fresno, CA, 93722, USA
Posts: 1,436
Likes: 0
Received 4 Likes
on
4 Posts
Re: New Whipple 305's
With 93 octane, 13-14psi is about max depending on maximum amount of timing and a/f.
Thanks,
Dustin
#50
Registered
VIP Member
Re: New Whipple 305's
If they were made from copper I would be rich!!
Only driving on weekends back & forth from chruch or was that the Prop Stop. Ok I'll bite how much do they weight compared to my LittleFields?
P.S. Mark says he can't mount pictures on the Motor.