omc spitfire ignition
07-25-2005, 09:48 AM
#1
Registered
Thread Starter
Join Date: Jul 2005
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
omc spitfire ignition
we rebuilt the motor and it needs to run at 5500 rpm....how do you bypass the rev limiter...1990 vip king cobra which tops out at 4800 rpm....thanks for your help 
07-25-2005, 12:05 PM
#2
Toxic FORMULA
Platinum Member
Re: omc spitfire ignition
You will very likely have to change out the Spitfire igniton for an aftermarket such and Crane , Mallory , or heaven forbid MSD . I have never heard of being able to change the the factory limiter on OMCs
07-27-2005, 12:10 PM
#3
Registered
Thread Starter
Join Date: Jul 2005
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Re: omc spitfire ignition
yep thats what we were thinking as well....change it out. but, i have seen in another forum where the rev limiter is bypassed by tieing one wire with another and the third wire is connected with a diode to ground....thanks for the input.
Thread
Thread Starter
Forum
Replies
Last Post
fund razor
General Q & A
15
12-22-2004 08:27 AM
