The two hatches are gasketed and dog down mighty tigh, maybe thats why no escape hatch. Considering the entire canopy was fabbed from one sheet of carbon fiber I would "assume" it is mighty strong...
|
I met Bill Pyburn at the OL booth yesterday and he said that he has not tested the boat and didn't allude to Mike testing the boat yet either. He also told me that the power is producing over 1800 HP per side. He may do the Miami Boat Show run with it next week if they can get it tested, dialed in, and ready and he will defiantly be at the Sarasota run at the end of March beginning of April.
|
Originally Posted by Pro1
(Post 2029281)
I have some questions for those who looked at the ol CAT.
1. OInly 3 steps? 2. Aluminum rams on the rudder not stainless? 3. Enclosed Cockpit with no escape hatch? 6 people seating with no escape? 4. Cockpit inner liner? All the water runs to the rear of the boat. How do you get the water out from underneath the inner liner? 5. 1800hp turbo motors in a pleasure boat? Is that a 2 hr motor? I have more questions.. Its not a Turbo:D |
Originally Posted by Pro1
(Post 2029281)
I have some questions for those who looked at the ol CAT.
1. OInly 3 steps? 2. Aluminum rams on the rudder not stainless? 3. Enclosed Cockpit with no escape hatch? 6 people seating with no escape? 4. Cockpit inner liner? All the water runs to the rear of the boat. How do you get the water out from underneath the inner liner? 5. 1800hp turbo motors in a pleasure boat? Is that a 2 hr motor? I have more questions.. 2. its stainless 3.there is a escape hatch in the tunnel the carpets covers it up... and taken out before the boat is going to go fast 4. this is not outerlimits first boat i don't know if you have seen but they have built some nice boats in the past.. there is a ton of ways for water to pass. i have seen 1st hand before the liner was put in. 5. the motors made more than 1800 (i was there watching the dyno runs) the motors will be detuned but not much, there are 3 pairs of these motors out there with much more than 2 hours whats your other question's James |
Originally Posted by the duke
(Post 2029657)
I think Sharkey has all the pictures that were posted on Boatfreaks.Org.:D
I just added another Slide Show that gives more detail of the paint work. Thanks to Scott B. Outerlimits Cat Photos Click here! The build process photos provided by NortechJ of Boatfreaks.org / ScarabJ of OSO. :drink: . |
Originally Posted by Pro1
(Post 2029281)
I have some questions for those who looked at the ol CAT.
1. OInly 3 steps? 2. Aluminum rams on the rudder not stainless? 3. Enclosed Cockpit with no escape hatch? 6 people seating with no escape? 4. Cockpit inner liner? All the water runs to the rear of the boat. How do you get the water out from underneath the inner liner? 5. 1800hp turbo motors in a pleasure boat? Is that a 2 hr motor? I have more questions.. I guess the owner had a budget and not could afford those things and I even heard he doesn't know how to swim:stupid: |
Wow ..the boat is beautiful.
Now who will be the FIRST to put TURBINES in one??? |
Originally Posted by Maximus
(Post 2030615)
Wow ..the boat is beautiful.
Now who will be the FIRST to put TURBINES in one??? |
Originally Posted by GATORONE
(Post 2030611)
I guess the owner had a budget and not could afford those things and I even heard he doesn't know how to swim:stupid:
beautiful rig...can you please bring to Chicago this summer? |
Originally Posted by Downtown42
(Post 2031198)
hey my wife don't swim either :bunny:
beautiful rig...can you please bring to Chicago this summer? |
All times are GMT -5. The time now is 05:36 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.