Two Piece Valve Covers
Has anyone used these, whose, how did they work and how much?
Thanks |
I have 2 sets on my motors . I want to change just for the look . I like the home made/ fabricated look .Mine are very nice aluminum covers with red anodized top plates that have ,I think, 4 allen bolts that hold the plates on and a rubber o-ring to seal it .Works well to look inside .But not enough room to adjust valves if thats what you want . But it is nice to be able to look inside and touch things to make sure things are still attached ! If you are interested in buying some ,let me know .I will e-mail you a picture of them if you want . THey are real good ones .THey have screw in breather hoses and screw in filler caps .both with o-ring seals . E-mail me if you want info and pictures . JOE
|
Dyno had posted a short time ago that he was looking to sell a set of B&M's. Unfortinatly, the deal didn't happen. Give him a jingle and ask if they are still available.
|
I have two sets on my boat,they work great.
|
I had two sets of B&Ms on my boat, but I sold them. They rubbed against my CMIs. And they didn't make getting to the valves that much easier..
|
I have two used pair of these 2-piece valve covers for sale as well for $225 per set. Let me know, Mark 616-291-7932
|
Mine work great but I forgot to tell that I have 3hr's on mill for clearances of intake
and rocker arms. Also use Chevy rubber valve cover gaskets with metal inside |
All times are GMT -5. The time now is 01:59 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.