Go Back  Offshoreonly.com > General Discussion > General Boating Discussion
Volvo Penta Bulletin - Ethanol >

Volvo Penta Bulletin - Ethanol

Notices

Volvo Penta Bulletin - Ethanol

Thread Tools
 
Old 04-25-2007, 11:46 AM
  #1  
Geronimo36
Gold Member
Thread Starter
 
Panther's Avatar
 
Join Date: Sep 2002
Location: Elkton, MD
Posts: 11,972
Received 131 Likes on 36 Posts
Default Volvo Penta Bulletin - Ethanol

This is common knowlege but thought I'd post it if anyone anyone is interested.

"Gasoline is now being distributed in the United States containing ethanol.

Volvo Penta gasoline engines may be operated using gasoline blended with no more than 10% ethanol that meets the minimum octane specification.

Fuel containing 10% ethanol is also commonly referred to "E10."

Users of ethanol-blended fuels must take additional care in the maintenance of their fuel systems. The effects vary depending on the fuel tank material. Most boats produced the last 20 years have fuel tanks constructed of aluminum, stainless steel, or plastics. Since ethanol-blended fuels attract and hold moisture, ethanol content can contribute to causing corrosion of tank material in aluminum fuel tanks. Corrosion material can clog fuel filters and damage injectors, carburetors, and other fuel system components. Stainless steel and plastic fuel tank materials are not affected by ethanol-blended fuels. However, ethanol-blended fuel can act as a solvent, loosening and washing old deposits or contaminates into the fuel system.

Fuel system or engine damage caused by contamination from water, foreign particles, sludge, or gums entering or forming in the fuel system is not covered by the Volvo Penta Limited Warranty.

Some older boats may have fiberglass fuel tanks. Ethanol-blended fuels have been shown to act as a solvent to the surface of fiberglass fuel tanks, weakening the fuel tank walls and allowing sludge and gum to form in the engine fuel system and valve train. As a result, Volvo Penta does not recommend the use of ethanol-blended fuels in fuel tanks constructed of fiberglass.

Recommendations when using 10% ethanol-blended (E10) fuel:

The use of a water separating fuel filter between the fuel tank and the engine is recommended. See your Volvo Penta dealer for information regarding installation of the appropriate water separating fuel filter in accordance with US Coast Guard regulations and ABYC standards.

Water separating fuel filters should be checked frequently for water and contaminates in accordance with the filter manufacturers recommended service intervals.

The use of a commercially available fuel stabilizer such as STA-BILŪ is recommended when storing ethanol-blended fuels for more than 2 weeks."
Panther is offline  
Old 04-25-2007, 12:07 PM
  #2  
Registered
 
Anarchy Powerboats's Avatar
 
Join Date: Jun 2004
Location: Phoenix, Havasu, Newport
Posts: 3,062
Likes: 0
Received 0 Likes on 0 Posts
Default

Good catch, nice find.
Anarchy Powerboats is offline  
Old 04-25-2007, 01:46 PM
  #3  
Registered
 
hunster's Avatar
 
Join Date: Feb 2005
Location: oceanport nj
Posts: 1,626
Likes: 0
Received 0 Likes on 0 Posts
Default

Wow Fuel stabilizer for a 2 week layup!
hunster is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sneekinfreek
Prop Talk
1
03-02-2010 10:31 AM
z.zuperboat
Drives and Lower Units
8
09-20-2007 08:41 AM
bcfountain
General Boating Discussion
3
06-20-2007 10:03 PM
stevejohns
General Q & A
4
07-11-2003 11:10 AM
Lenwa
General Boating Discussion
2
09-09-2002 05:44 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Quick Reply: Volvo Penta Bulletin - Ethanol


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.