yamahayz26

I am currently in the process of making a new switch panel and dash panel for my 1991 baja 260. It will allow you to powercoat your gauge bezel, switch panel, ignition,and accessory panels any color. The switch panel will have the cutouts(11 total switches) for new square style switches. I am having these made next week, so if anyone was trying to update their 260, this would be a perfect way to do so. Let me know ASAP if you may be interested and I will give more details.

Thanks

Trevor

email at
[email protected]

soldsoul4foos

trevor,
i might be interested. i have a 92 baja 270. i don't know if the dash panels are the same. i'll put a link with a pic of mine. I'm planning on updating the panels and gauges throughout on mine in a couple months and am trying to figure out how to get new panels ordered or made. I'm thinking of white to match the boat. Possibly white gauges with chrome trim. I've also seen a black background look good.

http://users.adelphia.net/~wgwarren/...t/IMG_0078.JPG

bill

p.s. i'm on yahoo and AIM as soldsoul4foos.

laterz.

yamahayz26

They will only work on the 260's, I will post some pictures when I get it completed. Thanks

yamahayz26

I have an extra set of the panels that I made for my boat, they are made out of aluminum and already have the holes cutout for the gauges and switches. Four total panels, the gauge panel, switch panel, key panel(no holes are precut), and the right side steering wheel panel(opposite key panel w/ no holes). They are blank aluminum, I will sell them them that way, or pick a powder coat and I can do that. Shoot me an email if you are interested: [email protected]

I also have the original plastic panels if anyone is interested in those

Sold my boat, don't need my 260 stuff anymore

Here is a pic of the completed project.

http://www.sandvalleymx.com/Ebay/boat/DSC02475.JPG

Playn

Those came out nice.