|
Hire someone to trailer it for you to JAX. POKER RUN.
|
Originally Posted by BUIZILLA
(Post 2148667)
there's a company a friend owns in Miami that makes hoists for dinghy's on the bow of big boats, I'm sure he could do something for you on the nose of the trailer.
JH Do you have a contact? Thank you |
1 Attachment(s)
Couldn't you make it fit here?
|
Gino,
You know how the flatbed car haulers work with the ramp sliding almost all the way off of the truck frame. Have a similar setup built that slides off the side of the gooseneck. Slides off, tilts, touches the ground, load bike on and tie down(while tilted), power slide back into place. If you don't mind the bike riding sideways. |
I would buy a helicopter with a matching paint scheme if I were you:drink:
|
I sure wish this was my biggest problem in life:rolleyes:
|
A side loading ramp with with a hydraulic jig that the bikes rides up and down the ramp. Bike stays straight, and no pushing the bike up the ramp. I will expalin to you tomorrow when I see you.
|
Originally Posted by puder
(Post 2148539)
if it were me I'd get myself an american flag jumpsuit, biuld a ramp that shoots fire and explosions on the back of teh trailer and i'd just jump the fu*ker right over the boat onto the trailer......... :P
|
Can you make a ramp along the center of the trailer between the bunks and 'ride' the bike up but will only work when the boat is off the trailer.
|
Originally Posted by cobra marty
(Post 2148825)
Can you make a ramp along the center of the trailer between the bunks and 'ride' the bike up but will only work when the boat is off the trailer.
|
| All times are GMT -5. The time now is 09:29 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.