Chief engines new 1800 HP Twin Turbo rocks!
#21
Platinum Member
Platinum Member
My question is how are the motors when running. I have run in a big power turbo boat that when launching through rough stuff, or throttling the motors would want to spool up at different times, they weren't far behind each other, but you noticed it significantly when running hard. The boat would want to lean toward the motor that spooled up quicker.
#23
Geronimo36
Gold Member
Although I've never seen one.... Merc lists a #7 as a drive they already have...
http://www.mercruiserparts.com/Show_...2FPropshaft%29
http://www.mercruiserparts.com/Show_...2FPropshaft%29
#26
Platinum Member
Platinum Member
Although I've never seen one.... Merc lists a #7 as a drive they already have...
http://www.mercruiserparts.com/Show_...2FPropshaft%29
http://www.mercruiserparts.com/Show_...2FPropshaft%29
They built the #7 for Diesels been around for several years.
Cougarman
#28
Registered User
Gold Member
Thread Starter
Join Date: Oct 2002
Location: MIAMI WHERE ELSE
Posts: 2,260
Likes: 0
Received 0 Likes
on
0 Posts
Funny you said that, I was at Chiefs yesterday and the same customer who baught these 6 turbos sent his 1075 Mercs to have Tommy install his ECU on it. End result made more power with less boost, go figure....for more info you must contact the Chief himself.
Albert
#29
Registered
Join Date: Feb 2007
Location: Ohio / Florida
Posts: 1,136
Likes: 0
Received 0 Likes
on
0 Posts