Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Anyone have a used 454 mag they wanna get rid of? (https://www.offshoreonly.com/forums/general-boating-discussion/161603-anyone-have-used-454-mag-they-wanna-get-rid.html)

Skeed UP 06-22-2007 09:18 AM

I am currently rebuilding my transom. My 502 is boxed up in my shop. 502 Bravo Mag- 124 hrs I have it for sale at $7,000.00 but for a OSO buddy $6,000.00 will take it. Just let me know.

Mbam 06-22-2007 09:18 AM

I would take $2500 for it. Heads, block, crank, rods, pan and what ever else I can find for it. This was a low hour engine I bouhgt from Mercury about 10 years ago, started to rebuild it when I had an engine shop, has been sitting ever since.

DURANGOKID59 06-22-2007 09:19 AM


Originally Posted by Young Performance (Post 2172844)
I can do the complete 540 shortblock only for $5600.

I appreciate the offer, but Im looking to hopefully spend less than 2000. Im trying to get this thing up and running good and get rid of it. I have a buyer for it, but obviously he wants it running before he takes it. I just dont have abunch of money to dump in it right now.

Young Performance 06-22-2007 09:22 AM

I understand completely. If I can do anything for you or if you have any questions, give me a shout. Good luck with it. Eddie

DURANGOKID59 06-22-2007 09:23 AM


Originally Posted by Mbam (Post 2172849)
I would take $2500 for it. Heads, block, crank, rods, pan and what ever else I can find for it. This was a low hour engine I bouhgt from Mercury about 10 years ago, started to rebuild it when I had an engine shop, has been sitting ever since.

Would you let it go less heads? I just had mine rebuilt less than 10 hours ago, so the top end should be good.

Skeed UP 06-22-2007 09:23 AM

Thats cool just keep me in mind if you know anybody looking a 502. I am restoring my entire boat so its going to take a while. I most likely will not go back with the 502 probably something smaller.

DaleSC 06-22-2007 09:24 AM


Originally Posted by DURANGOKID59 (Post 2172788)
As long as its cheap, Im willing to do anything at this point, what kinda money we talking?

Give me a call 843-846-9110

DaleSC

DURANGOKID59 06-22-2007 09:29 AM


Originally Posted by DaleSC (Post 2172859)
Give me a call 843-846-9110

DaleSC

Ill give you a call here in a bit Dale.

two-rocks 06-22-2007 09:40 AM


Originally Posted by DURANGOKID59 (Post 2172857)
Would you let it go less heads? I just had mine rebuilt less than 10 hours ago, so the top end should be good.

Could use some heads....if you don't need them....just let me know the details!

DURANGOKID59 06-22-2007 09:49 AM


Originally Posted by two-rocks (Post 2172878)
Could use some heads....if you don't need them....just let me know the details!

If I end up buying something used with a good set of heads, Ill get back in touch with you.


All times are GMT -5. The time now is 10:56 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.