Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Anyone have a used 454 mag they wanna get rid of? (https://www.offshoreonly.com/forums/general-boating-discussion/161603-anyone-have-used-454-mag-they-wanna-get-rid.html)

DURANGOKID59 06-22-2007 07:10 AM

Anyone have a used 454 mag they wanna get rid of?
 
Hey guys. Looks like something in the lower end of my 454 mag carbed engine came apart. So, I am in need of a used stock 454 mag to replace it with. I checked the classifieds, and didnt see what I was looking for, so thought I would ask and see what you guys might have. I know cheap and boating dont go together, but the cheaper the better. Thanks guys.

chaparral 2550sx 06-22-2007 07:27 AM

e-bay...good luck!

DURANGOKID59 06-22-2007 07:53 AM

Yeah, Ill check ebay also, but I was hoping someone here would have something so I dont have to deal with bidding and waiting to see if I won the auction or not. I need one in kind of a rush. Thanks

First Gun 06-22-2007 08:21 AM

Call Kevin @ 860-818-0877 had a pair of 454s around 6-7k?

DURANGOKID59 06-22-2007 08:29 AM


Originally Posted by First Gun (Post 2172770)
Call Kevin @ 860-818-0877 had a pair of 454s around 6-7k?

Thanks for the lead, do you know if he's willing to seperate? Ill give him a shout and see what he's got.

Mbam 06-22-2007 08:33 AM

Are you willing to put it together yourself? I have one in pieces, actually the crank is installed (bearings fitted)

DURANGOKID59 06-22-2007 08:36 AM


Originally Posted by Mbam (Post 2172785)
Are you willing to put it together yourself? I have one in pieces, actually the crank is installed (bearings fitted)

As long as its cheap, Im willing to do anything at this point, what kinda money we talking?

Young Performance 06-22-2007 08:48 AM

I have a pair of new 540s. I would be willing to split them. Complete from flame arrestor to pan and balancer to flywheel (no accessories)
I can back out any of the parts you don't want or need.

-Gen VI block
-Crower crank and rods
-JE pistons
-Total Seal rings
-Dart Iron Eagle heads with Manley valves, Isky springs, Comp Cams retainers and keepers, ARP studs, Harland Sharp roller rockers
-Crane cam and lifters, Manley pushrods
-Dart intake, Holley 830 carb.,Polished SS flame arrestor
-MSD distributor, coil, and wires
-Polished SS timing cover and valve covers
The above is 13,500, with a warranty. Like I said, I can back out any parts you don't want to save some money.
I can have it ready to ship in a few days. The long block is assembled already, so if you just want it, it is ready.

DURANGOKID59 06-22-2007 09:02 AM

Thanks Young. Thats quite a bit more than I want to spend right now though. Basically all I really need I think is the lower end. I just had the top half gone through and rebuilt less than 10 hours ago, and now something in the lower end let loose. Im not sure what but its clanking pretty good from down there.

Young Performance 06-22-2007 09:14 AM

I can do the complete 540 shortblock only for $5600.


All times are GMT -5. The time now is 01:28 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.