Chicago damage report
07-25-2007, 11:16 AM
#42
Registered
Join Date: May 2006
Location: In a box, s. side of chi town
Posts: 793
Likes: 0
Received 1 Like
on
1 Post
Yep we lost the seat on Kool Aids Cig on friday for the test run but thats becuase he used the wrong screws and was holding on while I was skipping from wave to wave having some fun. And yes we popped the rub rail on both side which worries me a lil but I know where to take it if its an issue. We didn't blow a motor this time out and its still going, better for the rest of the year.
07-25-2007, 11:35 AM
#44
OSO Content Provider
Commercial Member
07-25-2007, 12:58 PM
#47
10x
VIP Member
Found more damage on the 46 Cig last night. After I replaced the 3 screws from the panel in the cabin, I opened the engine hatch to give evrything a once over. I found the piece of SS trim that goes around the drip ledge in the bilge had lost a screw.
Luckily, I have some 1/2" long #4 screws and replaced it. Oh , and each dry sump oil tank for the engines were about a half a qt. low too. Damn maintenance !!!
Luckily, I have some 1/2" long #4 screws and replaced it. Oh , and each dry sump oil tank for the engines were about a half a qt. low too. Damn maintenance !!!
__________________
Fountain powerboats rule "The Preacher"
Chicago Powerboat Club Director
[email protected]
www.chicagopowerboat.com
Fountain powerboats rule "The Preacher"
Chicago Powerboat Club Director
[email protected]
www.chicagopowerboat.com
07-25-2007, 12:58 PM
#48
Charter Mod
Charter Member
07-25-2007, 01:01 PM
#49
10x
VIP Member
Brandon, your Skater looked like it was "glued" to the water. Well, at least for the first minute that is. LMAO
__________________
Fountain powerboats rule "The Preacher"
Chicago Powerboat Club Director
[email protected]
www.chicagopowerboat.com
Fountain powerboats rule "The Preacher"
Chicago Powerboat Club Director
[email protected]
www.chicagopowerboat.com
