1000+ HP 28' Nordic Heat
#61
Registered
Thread Starter
Smitty,
I had the drive neutral or a little negative when it broke. I would love to know what caused it to break the case like it did. It didn't really have any other damage. Of course the pinion gear and forward gear were damaged when the input shaft moved forward, but that was about it. You're right, I think we are going to have trouble keeping one together with the 34 prop and 1.34 gears. Since the motor made it's power at 5500 rpm, I need to run that much gear and prop to keep the turns down. This also was a Max upper. Any suggestions?
Eddie
I had the drive neutral or a little negative when it broke. I would love to know what caused it to break the case like it did. It didn't really have any other damage. Of course the pinion gear and forward gear were damaged when the input shaft moved forward, but that was about it. You're right, I think we are going to have trouble keeping one together with the 34 prop and 1.34 gears. Since the motor made it's power at 5500 rpm, I need to run that much gear and prop to keep the turns down. This also was a Max upper. Any suggestions?
Eddie
#62
Registered
Thread Starter
#64
Registered
VIP Member
Join Date: Jul 2003
Location: Mt Juliet, TN
Posts: 2,159
Likes: 0
Received 0 Likes
on
0 Posts
#65
Registered
VIP Member
Join Date: Jul 2003
Location: Mt Juliet, TN
Posts: 2,159
Likes: 0
Received 0 Likes
on
0 Posts
Panther, there are several inside jokes from several of us carrying on a bunch of silly chit between ourselves that you are not aware of.
Eddie, STOP BOGARTING THE WHIMPLEBONG!
Eddie, STOP BOGARTING THE WHIMPLEBONG!
#66
Geronimo36
Gold Member
#67
Registered
VIP Member
Join Date: Jul 2003
Location: Mt Juliet, TN
Posts: 2,159
Likes: 0
Received 0 Likes
on
0 Posts
Would you like our new "GNC'd" propellers. The rover has just returned from mars with a drilled core sample. We have found after extensive testing the GNC'd Moonrock Labs to be the best performers.
#68
Registered
VIP Member
Join Date: Jul 2003
Location: Mt Juliet, TN
Posts: 2,159
Likes: 0
Received 0 Likes
on
0 Posts
#69
Registered
VIP Member
Join Date: Jul 2003
Location: Mt Juliet, TN
Posts: 2,159
Likes: 0
Received 0 Likes
on
0 Posts
Len, as a result of our new "Seven Blade Technology" and material that is "Out of this World" we are able to run a much higher x dimension than our competitors. We mount the Max Alpha upside down moving the centerline of the prop exactly in line with your swim platform so we may have to do some mods on it as well.
#70
Platinum Member
Platinum Member
Len, as a result of our new "Seven Blade Technology" and material that is "Out of this World" we are able to run a much higher x dimension than our competitors. We mount the Max Alpha upside down moving the centerline of the prop exactly in line with your swim platform so we may have to do some mods on it as well.
What keeps it from moving around....DUCT TAPE: