The 509 that came out of my old 27 excalibur (pictured above). It pushed that boat 80 so we'll so what happens.

Sorry Bruce couldn't give you everything:D

Do you know what kind of power the engine is making?

I never dynoed it, but I would say 550hp is a safe number.

Corsa
 

JDub, I've got the motor for that boat! Don re-built it .Let me know if your interested. Dave

Great thread !! Those Corsa's have great lines...

Any recent pictures ?

This was the corsa martini hull they used as a plug to make the newer style hull.80's vintage.1st offshore boat 1/2" of gel coat fairing material and a piece of wood to make the spalsh rail. Took about 4 months to sand all the gel off and straighten the hull. ran great with b/b trs set-up.

Here you go Scott:

Couple of the carbon fiber dash and gauges. Plus the back seat I made and had covered...it matches damn close to the seats.

Dude the boat looks really good !! great project !!

What did you end up setting the X-dim. at ?

18 1/4", that will put my prop shaft centerline about 3 1/2" below the keel. I can always go down. It's just more expensive to go up:D