Need a # 5 Prop!
#1
Registered
Thread Starter
Join Date: Aug 2005
Location: Marietta, Ga.
Posts: 777
Likes: 0
Received 0 Likes
on
0 Posts
Need a # 5 Prop!
Not sure how to measure but its a 26 x 17 13/16 4 blade cleaver . Old one is cracked and I also need to drop 300 to 400 rpm's. This is on a single 32 velocity with 670 horse and the motor can turn 5800 if that helps . As soon as you start trimming the boat it is on the rev limiter.
#4
I have a 17.5 x 33 R for a #6 for sale if that will fit. Might be about perfect for you to drop rpms. Not sure if an adapter is needed to put in on a #5
Last edited by masher44; 09-25-2007 at 12:01 AM.
Thread
Thread Starter
Forum
Replies
Last Post
MIKEHTMSR24
General Boating Discussion
3
07-22-2002 03:18 PM