36 Quad Deep Impact
3 Attachment(s)
Jeff, 10' beam. So far we have seen 78 but we are about 600 rpm low. On this hull that is where the speeds come in.
We are going to run some different 3 and 4 blades and have a custom tie bar being made at Marine Machine. We are trying to get mid eighties with four stoke stock power and out of the box props. We know it can be dome easy with 300xs motors. Been packed here all day, waiting for someone to blow the light and get creamed. Some more shots |
I agree the Mercs look very nice in white. Very impressive, I bet it sounds pretty good too!
|
Originally Posted by underpressure
(Post 2256255)
Transom
|
How much $ ? and can you add the two front bench seats or are they part of the liner ?
|
Originally Posted by underpressure
(Post 2256236)
these are the new seats we just did in tan Ultrasuede.
Carl |
Love the Boat and the seats are really classy in that color. That is my favorite boat interior color.
|
I saw this today on my way down to KW this am, looked HUGE, wht does look great on the OBs. Great work guys.
|
with quads , how do they rotate ? or counter rotate?
port side set up as standard rotation as if it were just a twin application ? them the same for starboard? |
nice layout and seats, just not sure of the color of the seats. Would like to hear more performance numbers like fuel flow and mpg at a 3800-4000-4500rpm.
|
Quad
Thanks for the comments. Remember about Deep Impact its all about custom. Pick your color, pick your interior fabric and color, and pick your layout.
We do have two different forward seat modules, one that seats two each side, and a larger one that has filler cushions to make a sunbed. We even have a hydraulic sunbed option for in front of the console like on Buca's boat. The vinyl supplier swears we can scrub the heck out of this and it wears like iron. Dean, I know John well and talked with him at length before we went full throttle into Deep Impact. He is really on his game as this boat is not weight sensitive like some steps and does carry the nose slightly. Carl |
All times are GMT -5. The time now is 03:38 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.