28'-ish Single Engine Vee w/ true Surface Drive
09-27-2007, 04:33 PM
#52
Platinum Member
Platinum Member
09-27-2007, 09:42 PM
#53
Registered
Offshoreonly Advertiser
Racer
09-28-2007, 11:51 AM
#57
Registered
09-28-2007, 02:06 PM
#58
JC Performance Engines
Gold Member
09-28-2007, 03:03 PM
#59
Registered
Join Date: Jan 2007
Location: Victorville, CA
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
NO those on the web site are not the ones that were built into
the Scarab, They sent a insert to put into the mold on each
side on the bottom, Then the hull was molded complete so
that a pad was made just the right size to insert the trim plate
flush with bottom and even with the transom "Have I lost you
yet", Guess everything worked fairly well they won the first
race at the worlds in Key West that year. Mike J.
the Scarab, They sent a insert to put into the mold on each
side on the bottom, Then the hull was molded complete so
that a pad was made just the right size to insert the trim plate
flush with bottom and even with the transom "Have I lost you
yet", Guess everything worked fairly well they won the first
race at the worlds in Key West that year. Mike J.
01-09-2008, 10:48 AM
#60
Registered
This boat is/was an experiment; built for an guy who came to us wanting this specific setup. This is not a conversion. Dialing in is going to be a joint exercise. When the trailer was built, the boat had nothing on the transom; so the trailer is just temporary as is. The boat has not been in the water yet, so tab needs are undefined at this point.
It's something new and different for AT.
Who knows what's next?
It's something new and different for AT.
Who knows what's next?
