Griffin00

1990 Eliminator took a shot to the right front Sponson at the running light. I hot a rock embankment on the way to getting it detailed. The boat has a whole approx. 10-12inchesx5inches around thru the deck and side(right at the rubrail)
The boat jumped after hitting the embankment and jumped smashing the floor just behind the winch. From the boat jumping it also cracked the inner gimble which holds the steering assembly on the inside gimble which is made of cast. I'm looking to see if this type of damage is repairable or based on the impact and structure consider it done?
I have photos and would like to some info if possible from anyone familiar with this type of damage. The hull is original Gel with 4 Gel stripes which surround the boat. The gel is on top of wood(Bulsa?) A big problem is access to the damage. Labor to remove the birth/interior/labor to replace the wood/Gel/Stripes?
[email protected]

Thanks Very Much

DirtyMoney

What area are you in?

OkieTunnel

Pictures please. Doesn't sound that bad.

Griff

I guess it would be up to the insurance company as to whether or not its fixable or should be salvaged.

RunninHotRacing163.1

Send it back to LEACH at eliminator in mira loma,been down there when they put 3 foot of sponson back on the race boat and sent it back out the door