Originally Posted by VetteLT193
(Post 2367262)
I don't want to be a downer, but I have to ask if you can even see the tips on your boat. Seems like a real PITA for nothing to me. I'd apply the $500 towards some other upgrade
|
Originally Posted by Ryan8886
(Post 2366700)
The center section is stainless steel (part of the Silent Choice). So it's not 18" of flex pipe...just the two ends on either side of the pipe. Alignment still an issue or not??
|
Your external flappers are clamped on to a very short SS exhaust tip.Take one of the flappers off and you'll see what we are talking about.
|
Originally Posted by VetteLT193
(Post 2367262)
I don't want to be a downer, but I have to ask if you can even see the tips on your boat. Seems like a real PITA for nothing to me. I'd apply the $500 towards some other upgrade
|
Do it anyways. Makes the transom look better. We did it on our old Fountain, actually changed the pitch of the exhaust a little and made for a cleaner look.
|
Originally Posted by kennyo
(Post 2368948)
$500 dollars? Where in the hell are you buying tips at?
|
Originally Posted by VetteLT193
(Post 2368959)
With the internal flappers they generally run $80-90 each, times 4, plus shipping or tax, plus whatever other crap you need and didn't think of. I figured $500 was a pretty decent number. Do you think I'm high or low?
|
Originally Posted by Ryan8886
(Post 2368994)
Tips I'm looking at are used for about $100 for all 4.
|
Tips
Originally Posted by Ryan8886
(Post 2368994)
Tips I'm looking at are used for about $100 for all 4.
Barry |
Originally Posted by Ryan8886
(Post 2368994)
Tips I'm looking at are used for about $100 for all 4.
|
All times are GMT -5. The time now is 11:47 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.