Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   A must for anyone that trailers their boat! (https://www.offshoreonly.com/forums/general-boating-discussion/176727-must-anyone-trailers-their-boat.html)

LubeJobs42 01-04-2008 10:05 PM

A must for anyone that trailers their boat!
 
Just got one of these installed. It moniters the air pressure and temp of the tires on your truck and trailer. If a tire gets low, you get a warning. If the temp rises (which causes blow outs) you get a warning. I got it on the truck and put it on both trailers. Which ever trailer I hook up, it starts reading. Very cool set up!

http://cgi.ebay.com/ebaymotors/ws/eB...104153631&rd=1

LV 01-04-2008 10:30 PM

Thats really slick

packinair 01-04-2008 10:32 PM

Niceeeee

DMOORE 01-04-2008 10:35 PM

Very cool product. Thanks for the tip.


Darrell.

Sydwayz 01-04-2008 10:46 PM

Sharp! I like it.

I religiously use a laser pyrometer to check tire temps while traveling, which will indicate tire issues.

I'd love to see them create a sensor that will monitor temps via replacing the rubber dust cap that goes over the bearing buddy/grease fitting as well. This will give you heads up into bearings heating and failing.

PARADOX 01-04-2008 11:38 PM

I could have used this before my tire blow a few months ago. I been thinking about something like.. ever since.

cobra marty 01-05-2008 04:32 AM

"not to be used on alumn. wheels" not good for me.

vagrant 01-05-2008 07:45 AM


Originally Posted by Sydwayz (Post 2394060)
Sharp! I like it.

I religiously use a laser pyrometer to check tire temps while traveling, which will indicate tire issues.

I'd love to see them create a sensor that will monitor temps via replacing the rubber dust cap that goes over the bearing buddy/grease fitting as well. This will give you heads up into bearings heating and failing.

That's what I use. This looks to be a really interesting product thanks Gino.

bojoe2 01-05-2008 10:09 AM

Gino Very Cool

Tony Montana 01-05-2008 10:22 AM


Originally Posted by cobra marty (Post 2394157)
"not to be used on alumn. wheels" not good for me.

I read that also. Sucks for most of us that have aluminum wheels.


All times are GMT -5. The time now is 01:37 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.