Originally Posted by LZH
(Post 2490449)
Thanks for your opinion nonetheless....I tend to agree.
Sweet ............love the boat!!!!!!! Is it from SoCal ? |
Yup - The boat's new home is Los Angeles !!
|
Are you in LA area?
|
Originally Posted by PhantomChaos
(Post 2490459)
Are you in LA area?
The boat is currently at Mobile Marine Service (Matt Brayton) getting an overhaul. |
Originally Posted by LZH
(Post 2490460)
Yes - boat stays at my shop at Hawthorne Airport - shhhhhh, don't tell big chubby !!!:party-smiley-004:
The boat is currently at Mobile Marine Service (Matt Brayton) getting an overhaul. Sweet....lets hook up sometime with the SCOPE gang. Matt is a good guy from what I have experiance and have also heard. What are you having done? When are you gonna hit the water again? www.SCOPEinfo.com |
Originally Posted by PhantomChaos
(Post 2490463)
Sweet....lets hook up sometime with the SCOPE gang. Matt is a good guy from what I have experiance and have also heard. What are you having done? When are you gonna hit the water again?
www.SCOPEinfo.com I plan on getting involved as much as time allows with SCOPE. I've done quite a bit myself....list is pretty long...lots of new rigging, just about everything that is bolted to the decks has either been replaced or removed and either powdercoated or painted, swimplatform, all railings including nose rail, transom assemblies, new gimble rings, vertical shafts, lower pivot shafts, Matts adjustment nut fix with stainless plate, brand new Dollar Offshore built XR uppers and IMCO shorty lowers, tabs removed/media blasted IMRON painted, pitot tube removed and reglassed (GPS speedo), new drive cables and assemblies, ingition coils, TStats, housings, raw water impellers, new Hydomotive props and backup Bravo ones, paint work, glass work, possible wet sand, polish LCD install, stereo redo, reworked comm system...lots of other bits and pieces here and there :) Not to mention fresh Dean Gellner 500EFI's balanced and bluprinted etc...before the drive failure I was running 83 with 5blades.... She's gonna be awesome when Matts done and run strong and true. Supposed to splash her Sat to test everything...then maybe catalina the following weekend and then Desert Storm !! Next is to pull the dash surrounds for re powdercoat and then redo the wood floors. It's ongoing but she'll be perfect when I'm done. |
2 Attachment(s)
IMHO - I am torn. I like the red stripe on a black and white boat, see pics of my old Kryptonite. I agree with Dreamer though in keeping the original theme as it is very classy.
|
Don't do it. You have one of the few boats in the go-fast world that doesn't have a cheesy kitchen sink paint job. Nice and subtle.
Super classy the way it is...I love it. |
It definitely gives the boat that retro look. Cig made just a small handful of black-sided 35's and they had the red/silver Cigarette stripe. The only one I remember with the solid red stripe was the late-70's 35 that was a project- F/S in the Cig forum and then sold on Ebay. Earlier this year. You can find pics there.
Aesthetically, if you do the red, you're going to have to bring red in elsewhere. As an accent point, it looks natural in the "1" in the oval logo. Adding the stripe might work if you added red accents to your silver interior but then you have a confusing blend of non-complimentary colors. Black/white/silver works well. Ditch the silver and go red/white or all red on the interior and then the red stripe works. Less is more. |
nooooooo way!!!!!!!!! keep it the way it was :)
|
All times are GMT -5. The time now is 07:50 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.