Big Day At Scorpion Racing Engines
#1
Gold Member
Gold Member
Thread Starter
Join Date: Mar 2003
Location: Grosse ile michigan
Posts: 2,369
Likes: 0
Received 79 Likes
on
32 Posts
Big Day At Scorpion Racing Engines
I would just like to say that i had one of my better days at scorpion racing...These guys are top notch i have never seen a shop as clean and orginized as this....You could literally eat of every machine they had in the building..I have added a few pics for you guys to see waht i am talking about......There are a few of you here who use them here and i think a lot more of you should, Frank and Phil working together on my motor on the dyno was really something to see, it was kind of like two doctors working on a patient the way they bounce ideas of each other is amazing.......For this big of a shop to spend this much time with a small guy like me was really amazing,Frank made me feel like i was John hagin or david scott about to buy 10 blower motors from him.......You race guys need to take note because this is a up in coming big builder,and he loves the race support role.....
Plus my little 540 made some big numbers after they tweaked a few things..........Thanks a lot guys and i will see ya in the winter after i tear around all summer with my newly super tuned 540.......
I will add a video later of the dyno for now here is the pics of the shop,it is hard to tell but every room is totally seperate from each other.....Even the machinig area had not a spec of dust anywhere....
Plus my little 540 made some big numbers after they tweaked a few things..........Thanks a lot guys and i will see ya in the winter after i tear around all summer with my newly super tuned 540.......
I will add a video later of the dyno for now here is the pics of the shop,it is hard to tell but every room is totally seperate from each other.....Even the machinig area had not a spec of dust anywhere....
Last edited by nocigarette; 03-21-2008 at 09:16 AM.
#4
Gold Member
Gold Member
Thread Starter
Join Date: Mar 2003
Location: Grosse ile michigan
Posts: 2,369
Likes: 0
Received 79 Likes
on
32 Posts
Here is the video on one of the last pulls....It just broke 700 hoarse after they tweaked and tuned everything in.....
http://www.acidplanet.com/artist.asp?pid=1095753&T=6891
Just look to the right and click on play video
http://www.acidplanet.com/artist.asp?pid=1095753&T=6891
Just look to the right and click on play video
#6
Gold Member
Gold Member
Thread Starter
Join Date: Mar 2003
Location: Grosse ile michigan
Posts: 2,369
Likes: 0
Received 79 Likes
on
32 Posts
Just so ya guys know, i have no relation to this company and i am not gaining anything from this thread.....I just really believe what they are about could really be helpfull to a lot of you......here is the info to contact them.....
Scorpion Racing Engines LLC
12119 Levan Rd
Livonia, MI 48150 Map
(734) 953-4225..........frank or phil
Scorpion Racing Engines LLC
12119 Levan Rd
Livonia, MI 48150 Map
(734) 953-4225..........frank or phil
#7
Registered
Awesome, Mike! Can't wait to see that Magnum run with a Scorpion tune job done on your motor.
One thing you forgot to mention, There's room in the shop and a bridge crane with an electric hoist for rigging work, too.
Congrats,
Brian
One thing you forgot to mention, There's room in the shop and a bridge crane with an electric hoist for rigging work, too.
Congrats,
Brian
#8
Gold Member
Gold Member
Thread Starter
Join Date: Mar 2003
Location: Grosse ile michigan
Posts: 2,369
Likes: 0
Received 79 Likes
on
32 Posts
I really cant thank you enough brian for turning me on to scorpion......It was a expierence i wont forget.......Hell i cant wait to go back next winter and have them build me a monster.....
#10
Registered
Join Date: Sep 2003
Location: Toledo, Ohio/Las Vegas, NV
Posts: 3,029
Likes: 0
Received 1 Like
on
1 Post
Had Frank and Phil freshen my motors in the off season last year. Very pleased with the results and customer service. One of the few times in the marine industry when I found this to extend even after the check was cashed. Top notch guys!