Pasq,
Calling someone a "total liar" is bashing:( There were three OSO members at the testing-I guess none of them are credible?? Fill us in on your "offshore experience" since you state: "Anyone who understands performance boating knows these claims are far fetched". Which offshore body of water did you gain all of your experience??:D If your avatar is your "performance" boat, you maybe better suited for a "lake cruising" website. I'm sure we could help you locate such a site where your experience is better suited. |
Originally Posted by Robert Geoghegan
(Post 2498563)
Pasq,
Calling someone a "total liar" is bashing:( There were three OSO members at the testing-I guess none of them are credible?? Fill us in on your "offshore experience" since you state: "Anyone who understands performance boating knows these claims are far fetched". Which offshore body of water did you gain all of your experience??:D If your avatar is your "performance" boat, you maybe better suited for a "lake cruising" website. I'm sure we could help you locate such a site where your experience is better suited. PS. When he "casts" his first mold of a re-worked Mercruiser Alpha drive, he will be violating patents which Brunswick will surely enforce claim to. |
Pasq,
I like your new avatar!:D |
Originally Posted by Robert Geoghegan
(Post 2498657)
Pasq,
I like your new avatar!:D |
Smitty, did you run it?
Originally Posted by Wazzup Racing
(Post 2497580)
Dave, you should see ours. Dry Sump 750 with a Bravo. Chickened out at 112. Trick is put the Bravo Duo prop setup in an Imco shorty. Yowza. Smitty
Philip |
Originally Posted by pasquesi
(Post 2498584)
PS. When he "casts" his first mold of a re-worked Mercruiser Alpha drive, he will be violating patents which Brunswick will surely enforce claim to.
Does this mean SEI replacement drives are in violation also?!?!? |
Robert, I took a Sunday afternoon and made the trip to NJ to meet TD and check out his little project. As I have stated on other post on other sites, the drive was off of the boat for some mods. The parts were pretty trick looking. I pursued this due to having interest in running a shorter drive on my boat. The Alpha SS drives are way overpriced in my opinion and the price to swap of a Bravo/Imco would be more than the value of my boat.
On the other hand, he was a little out of line with some of his comments, but was provoked on most of them. As far as being banned, He was "Baited" on another site and called the site coordinator a "Liar", but he was correct and there were posts to prove it. So take it how you want. Still a neat project. If he was running off the wall speeds in a larger offshore boat because of some "one off/one of a kind" pieces, people would be on their knees at his door. Again, take it how you want it!! |
Originally Posted by pasquesi
(Post 2497523)
That guy, TrippleDigits, has been banned from OSO and a few other sites. He made many outrageous claims, one of which was the fact that he had a PHD degree in engineering. Yet, he couldn't put a sentence together. Further, his claims of a cut down alpha exceeding 100 mph with a small block were never backed up with ANYTHING. When his feet were put to the fire for proof, he responded so belligerently that he was banned. I don't believe a word he writes.
|
Originally Posted by Robert Geoghegan
(Post 2498337)
Check out his site for his 22 Stingray:
http://www.rlcpe.com/images/projects...pledigits.html Pasq, Triple Digits states his GOAL is 100 MPH, I don't see anywhere he claims to have done 100. He also works as an engineer, I don't know that he claimed to have a PHD. My brother in-law was with him on Easter Sunday when they went testing, his GPS didn't lie. |
Originally Posted by pasquesi
(Post 2498584)
PS. When he "casts" his first mold of a re-worked Mercruiser Alpha drive, he will be violating patents which Brunswick will surely enforce claim to. Those VOLVO PENTA patents for a Z-drive in general or ??? No, he can keep on doing whatever he wishes and good luck to him. Great effort and Thumbs up from over here. ...And he migth even have the skills equaling a Phd....seems he at least has some to brag about. |
All times are GMT -5. The time now is 12:30 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.