Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Need vents for my 311. Any help? (https://www.offshoreonly.com/forums/general-boating-discussion/184773-need-vents-my-311-any-help.html)

CasperToo 04-17-2008 03:18 PM

Need vents for my 311. Any help?
 
Hey Formula Guys... I got out early this year, April 16. In Michigan that's pretty good. However, while crushing some waves on Lake Michigan with my 311, I lost one of the triangular shaped vents from the outside of the engine compartment. (the ones near the back corner of the windshield) I called Formula, but they don't have any replacements- they're aftermarket now and I don't like the look. The one that I lost was on the starboard side.
Anyone have some vents we could deal on? I don't know where else I could go to find them. But the hole where my vent used to be is unsightly....
Thanks in advance guys.

formula 382 sr-1 04-17-2008 05:00 PM

3 Attachment(s)

Originally Posted by CasperToo (Post 2529106)
Hey Formula Guys... I got out early this year, April 16. In Michigan that's pretty good. However, while crushing some waves on Lake Michigan with my 311, I lost one of the triangular shaped vents from the outside of the engine compartment. (the ones near the back corner of the windshield) I called Formula, but they don't have any replacements- they're aftermarket now and I don't like the look. The one that I lost was on the starboard side.
Anyone have some vents we could deal on? I don't know where else I could go to find them. But the hole where my vent used to be is unsightly....
Thanks in advance guys.

Do they look like this ?I made these for our 272 I dont know if they are the same size .

CasperToo 04-17-2008 10:22 PM

Yes, they look like that. The 272 and 311 should take the same vents. Thanks for posting the pics, do those have slots or holes in them for air flow?

CasperToo 04-18-2008 07:56 AM

Must've had a bad monitor when I was trying to view the pics you posted at work. Those look nice and I can see the slots in them from my home pc. Difficult to make?

CasperToo 05-11-2008 02:29 PM

Glencove Marine came through! They had a set on the shelf. Thanks for the replies guys

formula 382 sr-1 05-11-2008 07:32 PM

Glad to help . :party-smiley-004:


All times are GMT -5. The time now is 11:07 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.