Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Outdrive issue (https://www.offshoreonly.com/forums/general-boating-discussion/187485-outdrive-issue.html)

mpally 05-26-2008 10:15 AM
The drive was off over the winter to check the gimbal. I'm 3 hrs from the boat now so I haven't checked the magnets on the drive.

Does the engine need to be pulled to replace the coupler?

whoya 05-26-2008 01:54 PM
Originally Posted by mpally (Post 2569946)
The drive was off over the winter to check the gimbal. I'm 3 hrs from the boat now so I haven't checked the magnets on the drive.

Does the engine need to be pulled to replace the coupler?
Yes engine needs to be pulled for a coupler.
If the engine is going into reverse its probably not the coupler/or splines worn down in coupler.


All times are GMT -5. The time now is 06:13 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.