21ft and 135mph....
#44
SeaRay Sundancer
Gold Member
Join Date: Nov 2005
Location: SW Missouri
Posts: 2,914
Likes: 0
Received 0 Likes
on
0 Posts
#46
Registered
Thread Starter
the six is a fairly recent addition to these boats, there is only a handful running them so far, lots of early speed masters and shaft drive boats, these are cutting edge. Re Roost, you would be surprised how little is thrown up, they are run with fairly small diameter props that might have a bearing on it
#47
Registered
I am going to say it is kicked up at the end as when the boat is running at speed, the length of the un-modified tab would have it creating downforce, even when fully retracted.
With the "kick" in it, I would assume it would run clear of the surface and not exert any force on the boat.
With the "kick" in it, I would assume it would run clear of the surface and not exert any force on the boat.
#48
Platinum Member
Platinum Member
Serious machine.
But sitting here in Vermont is about as close to that thing I want to get.
135mph in a 21ft no matter who designed it will get someone very close to Kervorkian results.
Hopefully I am wrong...
But sitting here in Vermont is about as close to that thing I want to get.
135mph in a 21ft no matter who designed it will get someone very close to Kervorkian results.
Hopefully I am wrong...
#49
Registered
#50
Platinum Member
Platinum Member