KAAMA |
03-07-2002 10:23 PM |
I talked with JimV about those Canfield heads he's got in his shop. I stood and watched him as he flowed them right "out-of-the-box" on his Super Flo 600 air flow bench. He installed some valves in the heads withOUT a valve job on the seats (fair or not) just to say that he flowed them "out of the box" and then he did a competition valve grind on the seats and flowed them again with ONLY the competition valve grind....um, ----well, He DID say that they are thick/beefy heads, BUT they didn't even come close to the numbers that Canfield is advertising, but JimV is the expert----I'll let him elaborate on it from here.
|