Donzi re-rig/update - dash and engine before and after
#1
Registered
Thread Starter
Donzi re-rig/update - dash and engine before and after
Thought you guys might like to see a few pics of a 26' ZX Donzi that I just finished for OSO member ZXXX Donzi. It had a stock 502 Mag MPI. It was turned into a 540 with aluminum Brodix BB2X heads and an M3 Procharger. I modified the manifold and fuel rail to accept 65lb injectors and converted it from a Mefi 1 to Mefi 4 with a custom harness. I also removed the entire Procharger fuel system and replaced it with a new pump, regulator, and plumbing. If someone is interested, I will give the entire parts list and custom touches the engine received. It made 872 hp at 5700 rpm, which is where it is proped to run. It pulled to 6200 rpm, where it made 945 hp.
The dash is made of carbon fiber that I layed up myself. It is very easy to do if anyone wants to know how. The switch panels are custom made by Team Marine. Those guys are awesome! It received new Gaffrig Performance gauges and IMCO steering. Here are a few shots. Enjoy.
Eddie
Engine-before.
The dash is made of carbon fiber that I layed up myself. It is very easy to do if anyone wants to know how. The switch panels are custom made by Team Marine. Those guys are awesome! It received new Gaffrig Performance gauges and IMCO steering. Here are a few shots. Enjoy.
Eddie
Engine-before.