46 cig 1075's
#11
VIP Member
VIP Member
Thread Starter
#13
Registered
Join Date: Apr 2003
Location: Ohio / Georgia
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
#15
Registered
Join Date: Feb 2002
Location: Lake Michigan
Posts: 6,627
Likes: 0
Received 0 Likes
on
0 Posts
Thats one nice RR, but if you want to keep it "Tunkey" with leaning on it every so often you might want to read this thread...
http://www.offshoreonly.com/forums/s...highlight=1075
Again, great Cig enjoy!
http://www.offshoreonly.com/forums/s...highlight=1075
Again, great Cig enjoy!
#17
VIP Member
VIP Member
Thread Starter
Thats one nice RR, but if you want to keep it "Tunkey" with leaning on it every so often you might want to read this thread...
http://www.offshoreonly.com/forums/s...highlight=1075
Again, great Cig enjoy!
http://www.offshoreonly.com/forums/s...highlight=1075
Again, great Cig enjoy!
YEP, the upper end was done at 75 hrs, have done and will do valve lash and oil changes every 15 hrs, full rebuilds by merc this winter (with their new pully system), after that uppers done at 75 hours and full rebuilds at 125, then time for new boat. I have 11 more weekends, so I'm hoping to make it, will rebuild trannies, inspect drives, and touch up cosmetics also this winter. Hopefully this plan insures the reliability I've seen so far.
#20
VIP Member
VIP Member