Looking for info on Seebold hull
Hey guys I'm not a big poster here but I am always reading. I have the opportunity to purchace a 26' single engine Seebold Eagle hull but can only find very limited information on it. Can anyone help? It has some bottom issues and I am trying to decide if it is worth repairing. Any help would be greatly appreciated.
Thank you in advance |
Seebolds are very hard to finf info on I have a 27 seebold eagle with twin 350's that i have found out is very rare only around 10 came with twins most have single 454's post some pics of your boat
|
I saw a blue Seebold 265 this weekend in LOTO. Don't know much about the bottoms but that was a VERY cool boat.
|
The bottoms are different its kind of a mod, v tunnel with a platform back with two small steps. It hadles great on smooth to slightly choppy water but when chop gets big it gets hairy. mine runs around 80
|
Originally Posted by never.enuff.stuff
(Post 2662100)
Hey guys I'm not a big poster here but I am always reading. I have the opportunity to purchace a 26' single engine Seebold Eagle hull but can only find very limited information on it. Can anyone help? It has some bottom issues and I am trying to decide if it is worth repairing. Any help would be greatly appreciated.
Thank you in advance The Seebold Eagle (pleasure boat) molds were bought by Emerald Boats, who then retooled many of the models. But by looking at the Emerald models, you might be able to get some idea on what kind of hull design you're getting. Do either of these look anything like yours? Vee 28' http://www.boattrader.com/listing/20...LETTO-91103236 Deck boat 26' http://www.boattrader.com/listing/19...UNION-93326039 |
I used to have a 24, I think it was before 1995 the seebold family still made them, you might be able to contact them.....I think Emerald boats bought their molds.
Again I think. The bottom on mine was a shallow v with a pad. But with a single engine it would scoot! |
Where are you located? I know where there is a really clean 1990 26'. It hasa newer 454 and what looked to be CMI e-top headers but were black. it is priced right too! I looked at last year when I downsized, but steered away from it because of the hard resale than some other brands. Seebolds are solid boats and are quick for the power but are not exactly wave crushers.
|
Originally Posted by Bad Company
(Post 2664202)
The bottoms are different its kind of a mod, v tunnel with a platform back with two small steps. It hadles great on smooth to slightly choppy water but when chop gets big it gets hairy. mine runs around 80
|
Originally Posted by BK
(Post 2664374)
Is this a deck boat or a vee?
The Seebold Eagle (pleasure boat) molds were bought by Emerald Boats, who then retooled many of the models. But by looking at the Emerald models, you might be able to get some idea on what kind of hull design you're getting. Do either of these look anything like yours? Vee 28' http://www.boattrader.com/listing/20...LETTO-91103236 Deck boat 26' http://www.boattrader.com/listing/19...UNION-93326039 It's a V but looks to be shallow. Conflicting info on whether its 25' or 26'. The deal is good but if its going to ride bad I may pass on it anyway. |
Years ago our old snap on dealer was trying to sell me a late 80's seebold it was a eagle I think,26 ft vee. The bottom had delaminated or something to where it literaly fell apart but the company was supossed to have fixed it,I RAN from that deal,if one fell apart It might be a common problem ,Smitty
|
All times are GMT -5. The time now is 12:10 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.