A lot of the time I pick it up at WalMart, other times at O'Reilys, AutoZone, Napa. Glad to hear the comment about how clean the engine was after 300 hrs of use.
|
My 292 has 530 hrs on a pair of 350 mags and use nothing but VR1 40W.
I had a relief spring in the oil pump crap out on starboard engine this year at 510hrs and while motor was out I took a look at the lower end and everything looked fantasic. Cyl walls, rod and crank bearings all looked great. Just through a new set of rod and main bearings in since we were there anyway and put her back in and runs like a champ again. I also change the oil every 30 hrs to so that might have something to do with it also. |
Originally Posted by wrinkleface
(Post 2695223)
is that full synthetic????
|
Originally Posted by Full Force
(Post 2695363)
Not synthetic but has more detergents then most oils these days, I am running it and have had no issues, i was having cam issues before (flat tappet) wiped out two this season on new engines, may have been other things also but this time I have 2 new cams and no problems! I use the 20-50
|
Originally Posted by johnnyboatman
(Post 2695228)
what the vr stand for?
|
Originally Posted by Full Force
(Post 2695363)
Not synthetic but has more detergents then most oils these days, I am running it and have had no issues, i was having cam issues before (flat tappet) wiped out two this season on new engines, may have been other things also but this time I have 2 new cams and no problems! I use the 20-50
|
Originally Posted by Panther
(Post 2695713)
The VR1 has higher levels of ZDDP wear additive which is very good for your flat tappet cams! :cool:
|
Is this VR1 40 a good choice for 525's????????????
|
I use it with my 540s. Just change it every 15-20 hours.
|
All times are GMT -5. The time now is 10:34 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.