I want a Rooster Tail
#21
arneson-industries.com
Offshoreonly Advertiser
#23
SeaRay Sundancer
Gold Member
Join Date: Nov 2005
Location: SW Missouri
Posts: 2,914
Likes: 0
Received 0 Likes
on
0 Posts
http://media.putfile.com/Thunder2
This is the biggest rooster I've ever seen wait untill about 1:41 of the video and you'll see what I mean.
you can also try extention boxes
This is the biggest rooster I've ever seen wait untill about 1:41 of the video and you'll see what I mean.
you can also try extention boxes
I was just going to post the shortened version of that.....starts at 1:41. Not only is the roost of that boat (RIP) unreal, but the sound as it goes by would make your heart skip.
#24
Registered
Join Date: Apr 2007
Location: Gas City Indiana
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Saw a Fountain at Lake Cumberland Poker Run that had what appeared to be stainless "tubes" mounted through the lower units of his outdrives. I only guessed it was for Rooster Tail effect. Can't remember if it was staggered or what drives, but it was the best looking red, black, and silver Fountain I've seen!
#26
Platinum Member
Platinum Member
I think that the opinions so far are correct. Go to surface drives, use #3, 5 or 6 drives or stagger the engines. Here is the tail from our 39 Top Gun. It throws this tail regardless of trim. Not bad for Bravos!
http://media.putfile.com/Cig-39
http://media.putfile.com/Cig-39
#28
Charter Member #232
Charter Member
You could try the shortened Konrads. Would raise your prop shaft height by about 3.5" if I remember correctly
__________________
Put your best foot forward!
Put your best foot forward!
#29
Registered
Saw a Fountain at Lake Cumberland Poker Run that had what appeared to be stainless "tubes" mounted through the lower units of his outdrives. I only guessed it was for Rooster Tail effect. Can't remember if it was staggered or what drives, but it was the best looking red, black, and silver Fountain I've seen!
PS, I find a simple little 22cal sufficient for shootin most roosters