The Race
#11
Registered
Thread Starter
I am running an ULTRADYNE 251/259 at .050-- .601/.625 sollid flat tappet cam. I am thinking about going to a larger hydraulic roller or even a sollid roller.
5800 rpm -- that was before I proped up to a 26 BRAVO 1 4-blade that I now turn at 5400 rpm.
5800 rpm -- that was before I proped up to a 26 BRAVO 1 4-blade that I now turn at 5400 rpm.
Last edited by Tinkerer; 03-09-2002 at 09:45 PM.
Thread
Thread Starter
Forum
Replies
Last Post
FREEZE FRAME VIDEO
OPA/The Jersey Boyz
4
10-19-2007 06:49 AM
FREEZE FRAME VIDEO
OPA/The Jersey Boyz
31
09-13-2007 07:31 AM
FREEZE FRAME VIDEO
General Racing Discussion
0
07-12-2007 08:25 PM
FREEZE FRAME VIDEO
OPA/The Jersey Boyz
7
12-07-2006 08:09 PM
Rambunctious
General Boating Discussion
4
08-09-2004 10:47 AM