I'm downsizing. 225 Promax on a 13ft boat!
#1
Registered
Thread Starter
I'm downsizing. 225 Promax on a 13ft boat!
I've been building this little 13 footer for about a month now. I got the motor on today. I still gotta get the interior done. It's a little overpowered, but it should be a trip!
Here's a link to the whole build from the beginning
http://forums.screamandfly.com/forum...d.php?t=167862
Here's a link to the whole build from the beginning
http://forums.screamandfly.com/forum...d.php?t=167862
Last edited by WILDMAN; 10-29-2008 at 11:36 PM.
#3
Platinum Member
Platinum Member
Sweet!
Make sure the two bolts holding the motor are stainless or else your rigging might be called in question, love the steering cable and don;t forget the bungies to keep that thing down and when you go in reverse....
Make sure the two bolts holding the motor are stainless or else your rigging might be called in question, love the steering cable and don;t forget the bungies to keep that thing down and when you go in reverse....
#5
Platinum Member
Platinum Member
Join Date: Sep 2006
Location: Colorado / Lake Norman, NC
Posts: 999
Received 0 Likes
on
0 Posts
I thought I was ambitious putting a merc200 on my 16'
That will be an absolute blast!
Although that thing is so small, it will probably porpoise you to death.
Also will want to sink at rest with all that weight in the rear.
Have to say, the build was looking good until he decided to roll with the arch.
is there a link to any video?
That will be an absolute blast!
Although that thing is so small, it will probably porpoise you to death.
Also will want to sink at rest with all that weight in the rear.
Have to say, the build was looking good until he decided to roll with the arch.
is there a link to any video?
Last edited by socalstone; 10-28-2008 at 10:06 AM.
#6
Registered
Thread Starter
I put the battery and gas tank up front. I finished all the wiring and rigging today. Motor will go back on tommorrow. Hope to get it wet on Friday.