Painting my Hustlers transom vs gel coat ?
#62
Geronimo36
Gold Member
#65
Frank Yea yea I hear ya,I'm running out of stuff to polish,the motors been together since Jan,drives are fresh rebuilt,I just finished the HP up grade kit to the transom asy,I took all the steering apart and polished everything,even the stainless hard lines,next is all the new anodes.
The boats all sanded,ended up Hustler didn't use any adhesive promoter on the clear on the white side so were re clearing the hole side
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
Last edited by Strip Poker 388; 05-07-2009 at 03:11 PM.
#67
Kirt I sent ya a reply,
Heres the steering,all new bushings,I polished all the shoulders on the bolts and reploshed the parts and cylinders etc.The transom asy are new and buffed and waxed
Heres the steering,all new bushings,I polished all the shoulders on the bolts and reploshed the parts and cylinders etc.The transom asy are new and buffed and waxed
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#69
Frank look how the drive came back from the Bravo ShopThe top cap looks like it slid across the bench,paint all chiped and scratched,They didnt clean none of the outside,Im still pissed about the upper gear failure
How ya like the leading edge.
How ya like the leading edge.
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
Last edited by Strip Poker 388; 05-13-2009 at 10:38 AM.