454 blks and good guy parts needed...
Hi,
I'm looking for 454 blks. All I need are blks only and standard bore would be plus however I'm open, 2 or 4 bolt main. Also what one should expect to pay $. Also looking for 2 - 731 or 611 crane cams, lifters, springs, whatever I can come up with. Cam specs posted as follows: Merc HP500 Carb Crane Gen VI#169611 Grind#HR-284-2S-10IG Adv 284, 292 at .004” Lift with 1.7 .576 / .598 At .050” 222, 230 ICL 105, ECL 115 LSA 110 Also 2 dart oval port intakes and Holley 800 cfm carbs. Any help would be great. I've been looking in the classifieds however come up empty handed so far. Thanks so much. John [email protected] |
eichoma/Mark has 2 454/525SC longblocks for sale. They are standard bore 4 bolt blocks and have never been apart. they have about 480hrs. Always fresh water. I know he wants to move them.
http://www.seriousoffshore.com/forum...ead.php?t=4090 |
http://www.offshoreonly.com/forums/s...1-900-obo.html
Price reduced to $1,700 for the pair!!!!. 230 original hours. |
RE: blocks... I'm idealy looking for mark 1V for the simplicity of making my parts work otherwise still open to anything at this point.
thanks again. John |
Call a guy by the name of Eric @ 301-637-1111 He might have what you need if not he might know how to get it.
Tell him Bill said to call |
Originally Posted by getrdunn
(Post 2802091)
Hi,
I'm looking for 454 blks. All I need are blks only and standard bore would be plus however I'm open, 2 or 4 bolt main. Also what one should expect to pay $. Also looking for 2 - 731 or 611 crane cams, lifters, springs, whatever I can come up with. Cam specs posted as follows: Merc HP500 Carb Crane Gen VI#169611 Grind#HR-284-2S-10IG Adv 284, 292 at .004” Lift with 1.7 .576 / .598 At .050” 222, 230 ICL 105, ECL 115 LSA 110 Also 2 dart oval port intakes and Holley 800 cfm carbs. Any help would be great. I've been looking in the classifieds however come up empty handed so far. Thanks so much. John [email protected] |
RE: cams and other parts
Thanks for your help. I look forward to hearing back from you. Email me anytime. Still looking for:
blks. carbs cams manifolds John [email protected] |
e-mail
Originally Posted by getrdunn
(Post 2806139)
Thanks for your help. I look forward to hearing back from you. Email me anytime. Still looking for:
blks. carbs cams manifolds John [email protected] |
All times are GMT -5. The time now is 03:07 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.