Offshoreonly.com - 496 - Cast stroker cranks?????

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - 496 - Cast stroker cranks????? (https://www.offshoreonly.com/forums/general-boating-discussion/205899-496-cast-stroker-cranks.html)

spazboz

04-01-2009 07:59 PM

I will try Mark on Firday and get back to you!

Nick (616)928-7362

getrdunn

04-01-2009 08:33 PM

Thanks again Nick, I appreciate you looking out for me here. Also do you know of a guy who use to have a 93 Challenger in your area. I use to boat out of Grand Haven and sold my boat to a guy in your area. I have lived up near Manistee for about 15 years now.
John
PS I'll give you a shout Friday or Saturday if you don't mind.

BY U BOY

08-12-2010 11:42 PM

3 Attachment(s)

Quote:

Originally Posted by mike tkach (Post 2833584)

for a street car they are probibally ok,but as you know the marine engine gets run harder most of the time,i don,t know anybody who has used a cast crank in a 496.my thinking is to use a forged crank,because if the cast one brakes,it will take out a lot of other[expensive] parts.just mo.02 worth.:ernaehrung004:

like this:eek::coolcowboy:

All times are GMT -5. The time now is 03:02 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page