Curious
Originally Posted by RunninHotRacing158
(Post 2838630)
BLAH BLAH BLAH :evilb:
Did you ever boat in or around the Grand Haven MI area from time to time. I use to run into a guy near this way years ago. The boat I'm thinking of must have been about a 32ft V-bottom simular to aerotech with drive ext's. Color was hot pink or something. It's been about 15 years now. Just curious. John |
1 Attachment(s)
Originally Posted by getrdunn
(Post 2838648)
Hey RunningHot,
Did you ever boat in or around the Grand Haven MI area from time to time. I use to run into a guy near this way years ago. The boat I'm thinking of must have been about a 32ft V-bottom simular to aerotech with drive ext's. Color was hot pink or something. It's been about 15 years now. Just curious. John |
Originally Posted by mmareno
(Post 2838535)
I am looking for a pair of 1471's super chargers. I have been checking the classifieds and I have seen anything listed on there lately. Any body got a set around with or without carbs. I have the chillers already. I am putting them on a pair of 572's. They have 871's now but looking for more!!
Thanks in advance 2 14 / 71 blower shop blowers -------------------------------------------------------------------------------- 2 complete clear anodized, billet case's 14 71's with adapter plates all 4 1550 BO laws carbs ($1250 apiece) KE flame arresters fuel logs and lines.. idler pulley , tensioner and throttle linkages....LESS THAN 30 HOURS... EVERYTHING you need from above the intercooler!!! $9500 OBO [email protected] Attached Thumbnails |
We have 14:71's new and used. We also have some PSI's here. Give Randy or Albert a call at 305-893-5018.
|
PSI's are the chit. Almost every gas engine that makes some nasty HP has them.
|
You can make 1000 with these. Sell off the rest of the stuff or build you an extra set of engines.
http://www.offshoreonly.com/forums/s...-complete.html They will polish back out, they turn really nice. Look real nice inside the case. |
Originally Posted by RunninHotRacing158
(Post 2838850)
get ahold of James on the board here ....
2 14 / 71 blower shop blowers -------------------------------------------------------------------------------- 2 complete clear anodized, billet case's 14 71's with adapter plates all 4 1550 BO laws carbs ($1250 apiece) KE flame arresters fuel logs and lines.. idler pulley , tensioner and throttle linkages....LESS THAN 30 HOURS... EVERYTHING you need from above the intercooler!!! $9500 OBO [email protected] Attached Thumbnails Thanks so much!! Mario |
Originally Posted by mmareno
(Post 2839234)
NOW YOUR TALKIN I will email him now
Thanks so much!! Mario Ya that's a good price. I just sold a perfect set for $9k so they're in the ballpark if low hour. |
Originally Posted by RunninHotRacing158
(Post 2838850)
get ahold of James on the board here ....
2 14 / 71 blower shop blowers -------------------------------------------------------------------------------- 2 complete clear anodized, billet case's 14 71's with adapter plates all 4 1550 BO laws carbs ($1250 apiece) KE flame arresters fuel logs and lines.. idler pulley , tensioner and throttle linkages....LESS THAN 30 HOURS... EVERYTHING you need from above the intercooler!!! $9500 OBO [email protected] Attached Thumbnails I sent him an email. Thanks |
Originally Posted by mmareno
(Post 2839237)
I sent him an email.
Thanks |
All times are GMT -5. The time now is 09:12 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.