speedo not working
#3
Charter Member # 55
Charter Member
The speedo pick up on the leading edge of the lower unit is probably plugged. Its a little notch about 4" above the bullet. The actual pick up tube could be connected to either drive.
#6
Registered
Join Date: Feb 2008
Location: Michigan
Posts: 715
Likes: 0
Received 0 Likes
on
0 Posts
#10
Registered
Join Date: Apr 2004
Location: New Jersey
Posts: 1,007
Likes: 0
Received 0 Likes
on
0 Posts
If the little rubber hose didn't pop off as Phantom Chaos advised then I would do as Griff suggested. I had the same issue last year and corrected it by pulling the drive and using a long thin drill bit to clear debris from the lower unit speedo pickup and it's vertical capilary where the rubber hose connects... problem solved!