Looking for Sea Strainer Stainless 90 high flow 1npt x 1 1/4 push on fittings
#1
Looking for Sea Strainer Stainless 90 high flow 1npt x 1 1/4 push on fittings
I'm looking for a high flow inlet fitting for my sea strainers instead of the right angle 90's below.Ive been looking at the boat parts guys they all look restricted. Who makes them? I think I remember Fred at Trick carried them,mandrel bent style 90,wonder were he was getting them? Thanks for any suggestions ,Rob
Or is it that big of deal?
heres a pick of my strainers,These 90's I found are CP,Teague and Eddie/Rex
Or is it that big of deal?
heres a pick of my strainers,These 90's I found are CP,Teague and Eddie/Rex
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#3
Ive seen them before somewhere already made up in the mandrel bent style?
I really wasn't wanting to get into manufacturing,Ill have to have the knurling done and pipe thread cut into it , then polishing it to chrome finish.
I really wasn't wanting to get into manufacturing,Ill have to have the knurling done and pipe thread cut into it , then polishing it to chrome finish.
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#4
Diamond Member #001
Charter Member
iTrader: (2)
Join Date: Oct 2000
Location: Coastal North Carolina
Posts: 4,808
Likes: 0
Received 5 Likes
on
4 Posts
Here it is - $60
Part number 05-8888841, 1" NPT X 1 1/4" HoseE 90 Deg stainless steel.
Does Stainless sell direct? I need one as well.
Part number 05-8888841, 1" NPT X 1 1/4" HoseE 90 Deg stainless steel.
Does Stainless sell direct? I need one as well.
__________________
Retired! Boating full-time now.
Retired! Boating full-time now.
Last edited by C_Spray; 04-13-2009 at 07:01 AM.
#5
Thanks for the info.
Now I need a Water pick up. I bought 2 of Teague adjustable and its to long , and even getting them to make it shorter its still to long,They didn't want to spend anymore time on it, So now
I wonder how the Stainless marine one will work? The Teague was $299, Stainless is 1295. that seems extreme
It needs to be adjustable about 3/4 to 1 inch from the bottom of the hull.
Any suggestions????
Thanks
Rob
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#10
Yes. the plate isn't big enough,also the drain plug sticks out and the pick up tube would hit it.I got a short style kit from Teague,were trying to shorten it some more.
heres some picks of the kit.tubing is cut to fit
Ive tried calling Fountain ,someone said they have short pick ups for them,it must be a short notch like the Hustler? Ive have called parts dept,sit on hold 23 mins last time and no return phone calls
yschmidt thanks for the help.
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.